Skip to content

Cheyenne County Fire and EMS Frequencies

Cheyenne County in Nebraska has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Cheyenne County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cheyenne County: Cheyenne County Fire 155.0550 MHz, narrow FM, 103.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Cheyenne County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cheyenne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cheyenne County FireSheriff/Fire Dispatch155.0550
In 158.9550
103.5 PLFMNWNAX210

Radio system sites in Cheyenne County

Program the control channel first; your scanner finds the voice channels from it.

Sidney · Nebraska State Radio System
RFSS 1 · Site 34 (hex 22) · NAC B86
Control 155.115, 155.61
Voice 154.4, 154.71
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cheyenne County

Common questions

What frequency does the fire department use in Cheyenne County?

Fire dispatch channels listed for Cheyenne County: Cheyenne County Fire 155.0550 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Cheyenne County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cheyenne County?

For Cheyenne County, start with the Sidney site of Nebraska State Radio System. Its control channels are 155.115, 155.61 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cheyenne County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Cheyenne County are marked encrypted.