Skip to content

Chase County Fire and EMS Frequencies

Chase County in Nebraska has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Chase County Fire and EMS Frequencies

Quick answer: Fire dispatch for Chase County: Chase County Fire 39.9800 MHz, FM, no tone. EMS dispatch for Chase County: Chase County EMS 453.5750 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Chase County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chase County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chase County FireChase County Fire – Dispatch39.9800FMKNIG207
Chase County FireChase County Fire – Dispatch460.5750
In 465.5750
FMNWPLF787

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Chase County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chase County FireChase County Fire – Fire Ground39.9000FMWSL413

EMS Dispatch

EMS Dispatch frequencies for Chase County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chase County EMSChase County EMS – Dispatch453.5750
In 458.5750
FMNWPNY722

Radio system sites in Chase County

Program the control channel first; your scanner finds the voice channels from it.

Imperial · Nebraska State Radio System
RFSS 1 · Site 49 (hex 31) · NAC B81
Control 155.805, 156.12
Voice 155.25, 155.505
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Chase County

Common questions

What frequency does the fire department use in Chase County?

Fire dispatch channels listed for Chase County: Chase County Fire 39.9800 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Chase County?

EMS dispatch channels listed for Chase County: Chase County EMS 453.5750 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Chase County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Chase County?

For Chase County, start with the Imperial site of Nebraska State Radio System. Its control channels are 155.805, 156.12 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chase County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Chase County are marked encrypted.