Skip to content

Cedar County Fire and EMS Frequencies

Cedar County in Nebraska has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Cedar County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cedar County: Cedar County Fire 154.3550 MHz, narrow FM, 136.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Cedar County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cedar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cedar County FireFire / EMS Paging154.3550136.5 PLFMNWNYI259
Cedar County FireCedar County Fire – Dispatch155.7825
In 153.7475
141.3 PLFMNKNEV389
Cedar County FireFire/EMS Pagers453.8750136.5 PLFMNWNYI259

Radio system sites in Cedar County

Program the control channel first; your scanner finds the voice channels from it.

Hartington · Nebraska State Radio System
RFSS 1 · Site 64 (hex 40) · NAC B84
Control 155.31, 155.565
Voice 154.01, 154.68
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cedar County

Common questions

What frequency does the fire department use in Cedar County?

Fire dispatch channels listed for Cedar County: Cedar County Fire 154.3550 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Cedar County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cedar County?

For Cedar County, start with the Hartington site of Nebraska State Radio System. Its control channels are 155.31, 155.565 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cedar County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Cedar County are marked encrypted.