Skip to content

Burt County Fire and EMS Frequencies

Burt County in Nebraska has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About Burt County Fire and EMS Frequencies

Quick answer: Fire dispatch for Burt County: Burt County Fire 453.4000 MHz, FM, 172 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Burt County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Burt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Burt County FireBurt County Fire – Dispatch453.4000
In 458.4000
172 DPLFMKNDP518

Radio system sites in Burt County

Program the control channel first; your scanner finds the voice channels from it.

Craig · Nebraska State Radio System
RFSS 1 · Site 75 (hex 4B) · NAC B83
Control 172.775, 173.825
Voice 169.8125, 172.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Burt County

Common questions

What frequency does the fire department use in Burt County?

Fire dispatch channels listed for Burt County: Burt County Fire 453.4000 MHz, FM, 172 DPL.

What scanner do I need to listen to fire and EMS in Burt County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Burt County?

For Burt County, start with the Craig site of Nebraska State Radio System. Its control channels are 172.775, 173.825 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Burt County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Burt County are marked encrypted.