Skip to content

Arthur County Fire and EMS Frequencies

Arthur County in Nebraska has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Arthur County Fire and EMS Frequencies

Quick answer: Fire dispatch for Arthur County: Arthur County Fire 154.1450 MHz, narrow FM, 229.1 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Arthur County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Arthur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Arthur County FireArthur County Fire – Dispatch154.1450
In 151.0925
229.1 PLFMNWQAY421

Radio system sites in Arthur County

Program the control channel first; your scanner finds the voice channels from it.

Arthur · Nebraska State Radio System
RFSS 1 · Site 41 (hex 29) · NAC B8B
Control 155.58, 155.82, 156.24
Voice 154.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Arthur County

Common questions

What frequency does the fire department use in Arthur County?

Fire dispatch channels listed for Arthur County: Arthur County Fire 154.1450 MHz, narrow FM, 229.1 PL.

What scanner do I need to listen to fire and EMS in Arthur County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Arthur County?

For Arthur County, start with the Arthur site of Nebraska State Radio System. Its control channels are 155.58, 155.82, 156.24 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Arthur County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Arthur County are marked encrypted.