About Antelope County Fire and EMS Frequencies
Quick answer: Fire dispatch for Antelope County: Antelope County Fire 155.0625 MHz, narrow FM, 065 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Antelope County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Antelope County Fire | Antelope County Fire – Dispatch | 155.0625 | 065 DPL | FMN | WQGR431 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Antelope County Fire | County Fireground | 153.8675 | FMN | WQGU669 | |
| Antelope County Fire | County Fireground | 153.9575 | FMN | WQGU669 | |
| Antelope County Fire | County Fireground | 154.3025 | FMN | WQGU669 | |
| Antelope County Fire | County Fireground | 155.1225 | FMN | WQGU669 |
Radio system sites in Antelope County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Antelope County
Common questions
What frequency does the fire department use in Antelope County?
Fire dispatch channels listed for Antelope County: Antelope County Fire 155.0625 MHz, narrow FM, 065 DPL.
What scanner do I need to listen to fire and EMS in Antelope County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Antelope County?
For Antelope County, start with the Elgin site of Nebraska State Radio System. Its control channels are 155.3175, 155.505 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Antelope County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Antelope County are marked encrypted.