Skip to content

Mill Spring Fire and EMS Frequencies

We do not have frequencies listed specifically for Mill Spring in Wayne County, Missouri yet. Countywide channels for Wayne County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Silva (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 15 miles away.

About Mill Spring Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mill Spring: Wayne Co. Fire Protection District 1 159.1575 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Wayne County channels that also cover Mill Spring

Fire Dispatch

Fire Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne Co. Fire Protection District 1Wayne Co. Fire Protection District 1 – Dispatch /Operations (Patterson)159.1575
In 154.8900
FMNWQYF997

Nearest trunked radio sites

Distances are measured from the center of Mill Spring.

Silva · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 39 (hex 27) · NAC 1C1 · about 15 mi away
Control 152.57, 154.665
Voice 154.1675, 154.3175, 154.9275, 155.0325
Van Buren · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 2 (hex 2) · NAC 1C2 · about 20 mi away
Control 155.64, 161.8875
Voice 155.07, 155.13, 155.295, 161.8
Poplar Bluff · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 8 (hex 8) · NAC 1C8 · about 21 mi away
Control 155.43, 172.4625
Voice 154.98, 155.325, 169.8875, 170.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mill Spring?

We do not have a fire dispatch channel listed specifically for Mill Spring. The county-level fire dispatch channels in the same county: Wayne Co. Fire Protection District 1 159.1575 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Mill Spring?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mill Spring?

For Mill Spring, start with the Silva site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 152.57, 154.665 MHz. Program a control channel first; the scanner finds the voice channels from it.