Skip to content

Warren County Fire and EMS Frequencies

Warren County in Missouri has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Warren County Fire and EMS Frequencies

Quick answer: Fire dispatch for Warren County: Warren County Fire 154.7925 MHz, narrow FM, 127.3 PL. EMS dispatch for Warren County: Warren County EMS 155.1375 MHz, P25, NAC 333.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Warren County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warren County FireWarren County Fire – Paging (Simulcast)154.7925
In 158.7900
127.3 PLFMNWRJR967
Warren County FireWarren County Fire – Response – Wright City (Simulcast*)154.7925
In 158.7900
NAC 313P25WRJR967
Warren County FireWarren County Fire – Dispatch(OLD??) Fire (Simulcast)158.6700
In 152.2100
151.4 PLFMNWPVF237

EMS Dispatch

EMS Dispatch frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warren County EMS OldWarren County EMS – Dispatch155.1375103.5 PLFMNWRJR967
Warren County EMSWarren County EMS – Dispatch (Simulcast*)155.1375
In 158.9550
NAC 333P25WRJR967
Warren County EMS OldWarren County EMS – Dispatch (see new 155.1375)157.5150
In 159.7950
151.4 PLFMNWPIY660

Radio system sites in Warren County

Program the control channel first; your scanner finds the voice channels from it.

Warrenton · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 15 (hex F) · NAC 1CF
Control 154.7625, 169.775
Voice 152.15, 152.57, 172.275, 172.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Warren County

Common questions

What frequency does the fire department use in Warren County?

Fire dispatch channels listed for Warren County: Warren County Fire 154.7925 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Warren County?

EMS dispatch channels listed for Warren County: Warren County EMS 155.1375 MHz, P25, NAC 333.

What scanner do I need to listen to fire and EMS in Warren County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Warren County?

For Warren County, start with the Warrenton site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.7625, 169.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Warren County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Warren County are marked encrypted.