About Benton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Benton: Scott County Fire 157.4500 MHz, narrow FM, CSQ. County-level ems dispatch that covers Benton: Scott County EMS - North / South 155.2350 MHz, narrow FM, 71.9 PL (backup).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Scott County channels that also cover Benton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire Backup | Scott County Fire – Countywide Dispatch (except S Scott EMS) | 155.5650 In 158.9700 | 100.0 PL | FMN | KAK611 |
| Scott County Fire | Scott County Fire – Paging /Tone-Outs only (Mixed Mode) | 157.4500 | CSQ | FMN | WQMY243 |
| Scott County Fire | Scott County Fire – Paging /Tone-Outs only (P25) | 157.4500 | P25 | WQMY243 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire Backup | South Scott County Fire (Vanduser) | 151.4300 In 158.9250 | FMN | WPPA450 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| NBC Fire Protection District (New Hamburg) | NBC Fire Protection District (New Hamburg) – Alternate | 154.2350 | FMN | WNVG965 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS - North / South Backup | North Scott County EMS | 155.2350 In 154.0100 | 71.9 PL | FMN | WSKH291 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Missouri Delta Medical Center (Sikeston) | Patient Reports (156.7 in use in area) | 155.3400 | FMN | KWV613 |
Nearest trunked radio sites
Distances are measured from the center of Benton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Benton?
We do not have a fire dispatch channel listed specifically for Benton. The county-level fire dispatch channels in the same county: Scott County Fire 157.4500 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Benton?
We do not have a EMS dispatch channel listed specifically for Benton. The county-level EMS dispatch channels in the same county: Scott County EMS - North / South 155.2350 MHz, narrow FM, 71.9 PL (backup).
What scanner do I need to listen to fire and EMS in Benton?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Benton?
For Benton, start with the Benton site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 170.5125, 170.9125, 171.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.