About Marshall Fire and EMS Frequencies
Quick answer: Fire dispatch for Marshall: Marshall Fire 154.3550 MHz, narrow FM, 723 DPL. County-level ems dispatch that covers Marshall: Saline County Government 154.7475 MHz, narrow FM, 245 DPL. Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Saline County Fire talkgroup 30403 (hex 76c3).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marshall, start with the Pipertown site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 11 miles away. Its control channels: 154.7325, 169.65 MHz.
Data updated .
Marshall conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall Fire | Marshall Fire – Dispatch | 154.3550 | 723 DPL | FMN | WZG269 |
Saline County channels that also cover Marshall
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saline County Government | Saline County Government – Dispatch – Countywide | 155.5650 In 159.0525 | 627 DPL | FMN | WQKR539 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saline County Government | Saline County Government – Dispatch – Countywide | 154.7475 In 155.9775 | 245 DPL | FMN | WQKR539 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| I-70 Medical Center (Sweet Springs) | Patient Reports | 155.3400 | FMN | WQKD286 | |
| John Fitzgibbon Memorial Hospital (Marshall) | Patient Reports. | 155.3400 | FMN | WQHV313 |
Missouri Statewide Wireless Interoperable Network (MOSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Saline County Fire | Saline County Fire – Dispatch | 30403 | 76c3 | D |
Nearest trunked radio sites
Distances are measured from the center of Marshall.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marshall?
Fire dispatch channels listed for Marshall: Marshall Fire 154.3550 MHz, narrow FM, 723 DPL.
What frequency does EMS or the ambulance service use in Marshall?
We do not have a EMS dispatch channel listed specifically for Marshall. The county-level EMS dispatch channels in the same county: Saline County Government 154.7475 MHz, narrow FM, 245 DPL.
Do fire departments and EMS use a trunked radio system in Marshall?
Yes. The county-level systems that cover Marshall are Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marshall?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marshall?
For Marshall, start with the Pipertown site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.7325, 169.65 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Marshall fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Marshall are marked encrypted.