About Ripley County Fire and EMS Frequencies
Quick answer: Fire dispatch for Ripley County: Ripley County Fire 154.1300 MHz, narrow FM, 165.5 PL. Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Ripley County Fire talkgroup 6607 (hex 19cf).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ripley County, start with the Doniphan site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels: 155.61, 161.9375 MHz.
Data updated .
Ripley County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ripley County Fire | Ripley County Fire – Dispatch (Countywide) | 154.1300 | 165.5 PL | FMN | WNMC317 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ripley County Fire | Ripley County Fire – Rural Operations (Multicast of 154.13) | 153.7850 In 158.7750 | 173.8 PL | FMN | WSCJ373 |
Ripley County trunked talkgroups
Missouri Statewide Wireless Interoperable Network (MOSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ripley County Fire | Ripley County Fire – Command | 6607 | 19cf | D |
| Ripley County EMS | Ripley County EMS – Dispatch | 6611 | 19d3 | D |
Radio system sites in Ripley County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Ripley County
Common questions
What frequency does the fire department use in Ripley County?
Fire dispatch channels listed for Ripley County: Ripley County Fire 154.1300 MHz, narrow FM, 165.5 PL.
Do fire departments and EMS use a trunked radio system in Ripley County?
Yes. Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ripley County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ripley County?
For Ripley County, start with the Doniphan site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.61, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ripley County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Ripley County are marked encrypted.
Are Ripley County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Ripley County are marked encrypted.