About Randolph County Fire and EMS Frequencies
Quick answer: Fire dispatch for Randolph County: Randolph County Ambulance District 155.1000 MHz, narrow FM, 103.5 PL; Randolph County Fire 154.8525 MHz, P25, NAC 29C. Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Randolph County EMS talkgroup 30207 (hex 75ff).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup; STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Randolph County, start with the Renick / Clark site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels: 155.355, 171.2625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Randolph County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Ambulance District | Randolph County Ambulance District – Rural / Fire – Dispatch BACKUP | 155.1000 In 155.8800 | 103.5 PL | FMN | KNFJ257 |
| Randolph County Ambulance District | Randolph County Ambulance District – Dispatch Secondary/backup to MOSWIN | 159.7975 In 158.8800 | NAC 667 | P25 | KNFJ257 |
| Randolph County Fire | Rural Fire/EMS – Dispatch (NEW) | 154.8525 In 159.1425 | NAC 29C | P25 | KNFJ257 |
| Randolph County Fire | Rural Fire/EMS – Tone-Outs/Paging | 154.8525 In 159.1425 | 103.5 PL | FMN | KNFJ257 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moberly Regional Medical Center | Patient Reports . | 155.3400 | FMN | WZJ441 |
Randolph County trunked talkgroups
Missouri Statewide Wireless Interoperable Network (MOSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County EMS | Randolph County Ambulance District – Dispatch | 30207 | 75ff | D |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | Red Bud Fire/EMS – Paging/Tone-Outs | 29009 | 7151 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | Red Bud Fire – Officers | 29010 | 7152 | D Encrypted |
Radio system sites in Randolph County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Randolph County
Common questions
What frequency does the fire department use in Randolph County?
Fire dispatch channels listed for Randolph County: Randolph County Ambulance District 155.1000 MHz, narrow FM, 103.5 PL; Randolph County Fire 154.8525 MHz, P25, NAC 29C.
Do fire departments and EMS use a trunked radio system in Randolph County?
Yes. Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup; STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Randolph County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Randolph County?
For Randolph County, start with the Renick / Clark site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.355, 171.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Randolph County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Randolph County are marked encrypted.
Are Randolph County fire and EMS talkgroups encrypted?
1 of the 3 talkgroups listed for Randolph County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.