Skip to content

Montgomery County Fire and EMS Frequencies

Montgomery County in Missouri has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Montgomery County Fire and EMS Frequencies

Quick answer: EMS dispatch for Montgomery County: Montgomery County Ambulance District 155.2350 MHz, narrow FM, 100.0 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Montgomery County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County Ambulance DistrictMontgomery County Ambulance District – Dispatch (Crews)155.2350100.0 PLFMNKXL379

Radio system sites in Montgomery County

Program the control channel first; your scanner finds the voice channels from it.

Americus · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 1 (hex 1) · NAC 1C1
Control 154.935, 170.3875
Voice 152.6, 155.0325, 171.675
Montgomery 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 89 (hex 59) · NAC 1C7
Control 773.04375, 773.29375
Voice 773.54375, 773.79375, 774.04375, 774.29375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Montgomery County

Common questions

What frequency does EMS or the ambulance service use in Montgomery County?

EMS dispatch channels listed for Montgomery County: Montgomery County Ambulance District 155.2350 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Montgomery County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Montgomery County?

For Montgomery County, start with the Americus site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.935, 170.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Montgomery County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Montgomery County are marked encrypted.