About Aurora Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Aurora: Aurora Rural Fire Protection District 155.6175 MHz, narrow FM, 192.8 PL; Freistatt Farmers Fire Protection 154.1450 MHz, narrow FM, 123.0 PL; Lawrence County Fire 154.3625 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Aurora: Barry/Lawrence County Ambulance District 154.2200 MHz, narrow FM, 241.8 PL; Mercy EMS 155.8650 MHz, narrow FM, 107.2 PL. Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Lawrence County Fire talkgroup 28103 (hex 6dc7).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Aurora, start with the Freistatt site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 9 miles away. Its control channels: 161.8625, 170.3875 MHz.
Data updated .
Lawrence County channels that also cover Aurora
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Aurora Rural Fire Protection District | Aurora Rural Fire Protection District – Paging /Dispatch/Fireground | 155.6175 In 159.4125 | 192.8 PL | FMN | WQXE850 |
| Freistatt Farmers Fire Protection | Freistatt Farmers Fire Protection – Tone-Outs | 154.1450 | 123.0 PL | FMN | WNJR404 |
| Lawrence County Fire | Lawrence County Fire – Tone-Outs / Response | 154.3625 | 94.8 PL | FMN | KNNJ742 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lawrence County Fire | Lawrence County Fire – Operations | 154.2200 | 107.2 PL | FMN | WNFA503 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Barry/Lawrence County Ambulance District | Aurora EMS – Tone-Outs / Dispatch | 154.2200 | 241.8 PL | FMN | KNDS807 |
| Barry/Lawrence County Ambulance District | Lawrence EMS – Rural Calls | 154.2200 | 146.2 PL | FMN | KNDS807 |
| Barry/Lawrence County Ambulance District | BLC EMS – Tone-Outs / Dispatch | 155.2200 In 159.2850 | 146.2 PL | FMN | KYL814 |
| Mercy EMS | Mercy EMS – Dispatch | 155.8650 In 154.1150 | 107.2 PL | FMN | WQRB292 |
| Mercy Hospital Aurora | St Johns EMS | 155.4000 | 151.4 PL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mercy Hospital Aurora | Patient Reports | 155.3400 | FMN | WPZQ679 |
Missouri Statewide Wireless Interoperable Network (MOSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lawrence County Fire | Lawrence County Fire – Dispatch(FUTURE) Fire – Countywide Dispatch | 28103 | 6dc7 | D |
Nearest trunked radio sites
Distances are measured from the center of Aurora.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Aurora?
We do not have a fire dispatch channel listed specifically for Aurora. The county-level fire dispatch channels in the same county: Aurora Rural Fire Protection District 155.6175 MHz, narrow FM, 192.8 PL; Freistatt Farmers Fire Protection 154.1450 MHz, narrow FM, 123.0 PL; Lawrence County Fire 154.3625 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Aurora?
We do not have a EMS dispatch channel listed specifically for Aurora. The county-level EMS dispatch channels in the same county: Barry/Lawrence County Ambulance District 154.2200 MHz, narrow FM, 241.8 PL; Mercy EMS 155.8650 MHz, narrow FM, 107.2 PL; Mercy Hospital Aurora 155.4000 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Aurora?
Yes. The county-level systems that cover Aurora are Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Aurora?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Aurora?
For Aurora, start with the Freistatt site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 161.8625, 170.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.