About Knox County Fire and EMS Frequencies
Quick answer: Fire dispatch for Knox County: Knox County Fire 154.0700 MHz, narrow FM, CSQ. EMS dispatch for Knox County: Knox County EMS 155.8650 MHz, narrow FM, 162.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Knox County, start with the Knox City site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels: 155.325, 170.9125, 171.6875 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Knox County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Fire | Knox County Fire – Dispatch – Countywide | 154.0700 | CSQ | FMN | WPQC820 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County EMS | Knox County EMS – Dispatch – Countywide | 155.8650 | 162.2 PL | FMN | WYE390 |
Knox County trunked talkgroups
STARCOM21 Statewide Illinois
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Knox County Fire | Galesburg police tac or Galesburg fire? | 1931 | 78b | D Encrypted |
Radio system sites in Knox County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Knox County
Common questions
What frequency does the fire department use in Knox County?
Fire dispatch channels listed for Knox County: Knox County Fire 154.0700 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Knox County?
EMS dispatch channels listed for Knox County: Knox County EMS 155.8650 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Knox County?
Yes. Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Knox County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Knox County?
For Knox County, start with the Knox City site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.325, 170.9125, 171.6875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Knox County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Knox County are marked encrypted.
Are Knox County fire and EMS talkgroups encrypted?
1 of the 1 talkgroups listed for Knox County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.