Skip to content

Iron County Fire and EMS Frequencies

Iron County in Missouri has 3 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Iron County Fire and EMS Frequencies

Quick answer: Fire dispatch for Iron County: Quad County Fire Protection District 154.3700 MHz, narrow FM, 127.3 PL; Iron County Fire 154.1825 MHz, narrow FM, 243 DPL (backup). Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Iron County Fire talkgroup 5009 (hex 1391).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Iron County, start with the Ironton site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels: 158.7975, 159.1875 MHz.

Data updated .

Iron County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iron County Fire BackupIron County Fire – Dispatch /Operations154.1825
In 156.0375
243 DPLFMNWQQK347
Quad County Fire Protection DistrictQuad County Fire Protection District – Dispatch154.3700
In 150.8050
127.3 PLFMNWNPV201

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Quad County Fire Protection DistrictQuad County Fire Protection District – Fire Ground154.2950FMNWNPV201

Iron County trunked talkgroups

Missouri Statewide Wireless Interoperable Network (MOSWIN)

Missouri Statewide Wireless Interoperable Network (MOSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Iron County FireIron County Fire – Dispatch (Countywide)50091391D
Iron County FireIron County Fire – Fire Ground50101392D
Iron County EMSIron County EMS – Dispatch /Operations50111393D

Radio system sites in Iron County

Program the control channel first; your scanner finds the voice channels from it.

Ironton · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 43 (hex 2B) · NAC 1C6
Control 158.7975, 159.1875
Voice 151.0175, 151.1075
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Iron County

Common questions

What frequency does the fire department use in Iron County?

Fire dispatch channels listed for Iron County: Quad County Fire Protection District 154.3700 MHz, narrow FM, 127.3 PL; Iron County Fire 154.1825 MHz, narrow FM, 243 DPL (backup).

Do fire departments and EMS use a trunked radio system in Iron County?

Yes. Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Iron County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Iron County?

For Iron County, start with the Ironton site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 158.7975, 159.1875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Iron County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Iron County are marked encrypted.

Are Iron County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Iron County are marked encrypted.