Skip to content

Holt County Fire and EMS Frequencies

Holt County in Missouri has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Holt County Fire and EMS Frequencies

Quick answer: Fire dispatch for Holt County: Southern Fire Protection District of Holt County Fire 155.4975 MHz, narrow FM, no tone. EMS dispatch for Holt County: Atchison-Holt Ambulance District 155.0550 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Holt County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Holt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Southern Fire Protection District of Holt County FireSouthern Fire Protection District of Holt County Fire – Dispatch (at Oregon) NEW155.4975
In 158.8125
FMNKVZ717

EMS Dispatch

EMS Dispatch frequencies for Holt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Atchison-Holt Ambulance DistrictAtchison-Holt Ambulance District – Dispatch (Mound City, Oregon)155.0550FMNKYX300
Atchison-Holt Ambulance DistrictAtchison-Holt Ambulance District – Dispatch (Fairfax-Atchison)155.0550
In 159.1575
FMNKYX300
Atchison-Holt Ambulance DistrictAtchison-Holt Ambulance District – Remote Link453.2875FMNKYX300

Radio system sites in Holt County

Program the control channel first; your scanner finds the voice channels from it.

Oregon · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 13 (hex D) · NAC 1CF
Control 169.775, 170.3875
Voice 154.695, 154.9425, 171.3875
Mound City 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 36 (hex 24) · NAC 1C6
Control 773.06875, 773.31875
Voice 773.56875, 773.81875, 774.06875, 774.31875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Holt County

Common questions

What frequency does the fire department use in Holt County?

Fire dispatch channels listed for Holt County: Southern Fire Protection District of Holt County Fire 155.4975 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Holt County?

EMS dispatch channels listed for Holt County: Atchison-Holt Ambulance District 155.0550 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Holt County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Holt County?

For Holt County, start with the Oregon site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 169.775, 170.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Holt County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Holt County are marked encrypted.