About Hickory County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hickory County: Central Hickory Fire/Rescue 154.8225 MHz, DMR, CC 4 · TG 1548225 · SL 1; HCFR Rescue 154.0400 MHz, NXDN96, RAN 10; Hickory County Fire 155.3175 MHz, NXDN96, RAN 10.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (DMR, NXDN96), which needs a scanner that decodes those modes.
Data updated .
Hickory County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Central Hickory Fire/Rescue | Fire/EMS Dispatch | 154.8225 In 159.0300 | CC 4 · TG 1548225 · SL 1 | DMR | WRVC947 |
| HCFR Rescue | HCFR Rescue | 154.0400 In 158.9400 | RAN 10 | NXDN96 | WSHU509 |
| Hickory County Fire | HCFR Nemo | 155.3175 | RAN 10 | NXDN96 | WQCB895 |
| Hickory County Fire | HCFR Sherman | 155.8950 | RAN 10 | NXDN96 | WSCY647 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hickory County Fire | Hickory County Fire – Fire Ground | 154.1900 | CSQ | FMN | WQPI689 |
Radio system sites in Hickory County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hickory County
Common questions
What frequency does the fire department use in Hickory County?
Fire dispatch channels listed for Hickory County: Central Hickory Fire/Rescue 154.8225 MHz, DMR, CC 4 · TG 1548225 · SL 1; HCFR Rescue 154.0400 MHz, NXDN96, RAN 10; Hickory County Fire 155.3175 MHz, NXDN96, RAN 10.
What scanner do I need to listen to fire and EMS in Hickory County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR, NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Hickory County?
For Hickory County, start with the Wheatland site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 161.925, 170.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hickory County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Hickory County are marked encrypted.