Skip to content

Gentry County Fire and EMS Frequencies

Gentry County in Missouri has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Gentry County Fire and EMS Frequencies

Quick answer: Fire dispatch for Gentry County: Gentry County Fire 155.9400 MHz, narrow FM, 146.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Gentry County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gentry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gentry County FireGentry County Fire – Countywide Dispatch (Grand River Ambulance)155.9400
In 153.7400
146.2 PLFMNWPMK853

Hospitals & Medical

Hospitals & Medical frequencies for Gentry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Northwest Medical Center (Albany)Patient Reports155.3400FMNKTG671

Radio system sites in Gentry County

Program the control channel first; your scanner finds the voice channels from it.

Stanberry · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 15 (hex F) · NAC 1CF
Control 155.3175, 170.6
Voice 155.715, 155.895, 156.24
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Gentry County

Common questions

What frequency does the fire department use in Gentry County?

Fire dispatch channels listed for Gentry County: Gentry County Fire 155.9400 MHz, narrow FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Gentry County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Gentry County?

For Gentry County, start with the Stanberry site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.3175, 170.6 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gentry County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Gentry County are marked encrypted.