About Morrison Fire and EMS Frequencies
Quick answer: Fire dispatch for Morrison: Morrison Fire 154.3250 MHz, narrow FM, 127.3 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Morrison conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morrison Fire | Morrison Fire – Dispatch (DB County) | 154.3250 In 158.9400 | 127.3 PL | FMN | WPMA463 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morrison Fire | Morrison Fire – Fire Ground | 158.9400 | FMN | WPMA463 |
Gasconade County channels that also cover Morrison
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gerald - Rosebud Fire | Gerald – Rosebud Fire – Tactical Channel | 154.0325 In 154.0700 | 136.5 PL | FMN | KTG524 |
Nearest trunked radio sites
Distances are measured from the center of Morrison.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Morrison?
Fire dispatch channels listed for Morrison: Morrison Fire 154.3250 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in Morrison?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Morrison?
For Morrison, start with the Americus site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.935, 170.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Morrison fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Morrison are marked encrypted.