Skip to content

DeKalb County Fire and EMS Frequencies

DeKalb County in Missouri has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About DeKalb County Fire and EMS Frequencies

Quick answer: Fire dispatch for DeKalb County: Cosby / Helena Fire 155.5575 MHz, narrow FM, 032 DPL. EMS dispatch for DeKalb County: DeKalb-Clinton Ambulance District 155.8200 MHz, narrow FM, 118.8 PL (expired).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

DeKalb County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cosby / Helena FireCosby / Helena Fire – Dispatch155.5575
In 158.9400
032 DPLFMNWRCZ943

EMS Dispatch

EMS Dispatch frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb-Clinton Ambulance District Expired: Expired 12/23DeKalb-Clinton Ambulance District – Main (back-up for Clinton Co)155.8200118.8 PLFMNWNSS739

Radio system sites in DeKalb County

Program the control channel first; your scanner finds the voice channels from it.

Stewartsville 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 31 (hex 1F) · NAC 1C1
Control 773.06875, 773.31875
Voice 773.56875, 773.81875, 774.06875, 774.31875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in DeKalb County

Common questions

What frequency does the fire department use in DeKalb County?

Fire dispatch channels listed for DeKalb County: Cosby / Helena Fire 155.5575 MHz, narrow FM, 032 DPL.

What frequency does EMS or the ambulance service use in DeKalb County?

EMS dispatch channels listed for DeKalb County: DeKalb-Clinton Ambulance District 155.8200 MHz, narrow FM, 118.8 PL (expired).

What scanner do I need to listen to fire and EMS in DeKalb County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in DeKalb County?

For DeKalb County, start with the Stewartsville 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.06875, 773.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are DeKalb County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for DeKalb County are marked encrypted.