Skip to content

Dallas County Fire and EMS Frequencies

Dallas County in Missouri has 10 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Dallas County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dallas County: Dallas County Fire 150.9550 MHz, NXDN48, RAN 10. EMS dispatch for Dallas County: Mercy EMS 151.3400 MHz, narrow FM, 265 DPL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Dallas County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dallas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dallas County FireDallas County Fire – South Dispatch150.9550
In 159.1650
RAN 10NXDN48WPVL992
Dallas County FireDallas County Fire – South Tone-Outs (Only)150.9950
In 159.1650
82.5 PLFMNWPVL992
Dallas County FireFire Operations154.9875
In 156.1575
RAN 10NXDN48WPVL992
Dallas County FireDallas County Fire – North Tone-Outs (Only)154.9875
In 156.1575
82.5 PLFMNWPVL992
Dallas County FireDallas County Fire – Northeast Tone-Outs (Only)155.9625
In 153.8525
82.5 PLFMNWPVL992
Dallas County FireDallas County Fire – Northeast Dispatch155.9625
In 153.8525
RAN 10NXDN48WPVL992

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dallas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dallas County FireDallas County Fire – Local150.995082.5 PLFMNWPVL992
Southern Dallas County Fire Protection DistrictSouthern Dallas County Fire Protection District – Fire Ground154.0100FMNWNVU958
Southern Dallas County Fire Protection DistrictSouthern Dallas County Fire Protection District – Tactical Channel154.4300
In 159.0450
RAN 20NXDN48WNVU958

EMS Dispatch

EMS Dispatch frequencies for Dallas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mercy EMSMercy EMS – Dispatch (Buffalo)151.3400
In 159.2550
265 DPLFMNWZX647

Radio system sites in Dallas County

Program the control channel first; your scanner finds the voice channels from it.

Bennett Springs 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 59 (hex 3B) · NAC 1C1
Control 769.16875, 769.41875
Voice 769.66875, 769.91875, 770.16875, 770.41875
Buffalo 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 85 (hex 55) · NAC 1C5
Control 769.15625, 769.40625
Voice 769.65625, 769.90625, 770.15625, 770.40625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dallas County

Common questions

What frequency does the fire department use in Dallas County?

Fire dispatch channels listed for Dallas County: Dallas County Fire 150.9550 MHz, NXDN48, RAN 10.

What frequency does EMS or the ambulance service use in Dallas County?

EMS dispatch channels listed for Dallas County: Mercy EMS 151.3400 MHz, narrow FM, 265 DPL.

What scanner do I need to listen to fire and EMS in Dallas County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Dallas County?

For Dallas County, start with the Bennett Springs 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.16875, 769.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dallas County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Dallas County are marked encrypted.