Skip to content

Butler County Fire and EMS Frequencies

Butler County in Missouri has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Butler County Fire and EMS Frequencies

Quick answer: Fire dispatch for Butler County: Butler County Fire 154.4450 MHz, narrow FM, 167.9 PL. EMS dispatch for Butler County: Butler County EMS 152.4050 MHz, narrow FM, 754 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Butler County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireButler County Fire – Dispatch154.4450
In 150.7750
167.9 PLFMNWPLX408

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireButler County Fire – Fire Ground153.8900FMNWQET759
Southeast Missouri Search and RescueSearch and Rescue Operations154.4000
In 159.1875
107.2 PLFMNWRAT407

EMS Dispatch

EMS Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County EMSButler County EMS – Dispatch152.4050
In 157.6650
754 DPLFMNWQSY399

Radio system sites in Butler County

Program the control channel first; your scanner finds the voice channels from it.

Poplar Bluff · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 8 (hex 8) · NAC 1C8
Control 155.43, 172.4625
Voice 154.98, 155.325, 169.8875, 170.4625
Water Tower (North) · Poplar Bluff Public Safety
Site 1 (hex 1)
Voice 854.2375, 856.2375, 857.2375, 858.2375, 859.2375
VA Hospital (Central) · Poplar Bluff Public Safety
Site 2 (hex 2)
Voice 855.2125, 856.2125, 857.2125, 858.2125, 859.2125
IP Water Tower (South) · Poplar Bluff Public Safety
Site 3 (hex 3)
Voice 855.9875, 856.9875, 857.9875, 858.9875, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Butler County

Common questions

What frequency does the fire department use in Butler County?

Fire dispatch channels listed for Butler County: Butler County Fire 154.4450 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Butler County?

EMS dispatch channels listed for Butler County: Butler County EMS 152.4050 MHz, narrow FM, 754 DPL.

What scanner do I need to listen to fire and EMS in Butler County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Butler County?

For Butler County, start with the Poplar Bluff site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.43, 172.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Butler County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Butler County are marked encrypted.