About Scopus Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Scopus: Bollinger County Fire 154.4300 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Scopus: Bollinger County EMS 155.3925 MHz, narrow FM, 205 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Bollinger County channels that also cover Scopus
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bollinger County Fire | Bollinger County Fire – Dispatch | 154.4300 In 159.0750 | 141.3 PL | FMN | KNNH244 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bollinger County EMS | Bollinger County EMS – North – Dispatch / Operations | 155.3925 In 158.8125 | 205 DPL | FMN | WQFZ648 |
| Bollinger County EMS | Bollinger County EMS – Old | 155.8650 | 131.8 PL | FMN | WNIJ977 |
| Bollinger County EMS | Bollinger County EMS – Dispatch (in use) | 155.8650 In 154.9325 | DMR | WNIJ977 |
Nearest trunked radio sites
Distances are measured from the center of Scopus.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Scopus?
We do not have a fire dispatch channel listed specifically for Scopus. The county-level fire dispatch channels in the same county: Bollinger County Fire 154.4300 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Scopus?
We do not have a EMS dispatch channel listed specifically for Scopus. The county-level EMS dispatch channels in the same county: Bollinger County EMS 155.3925 MHz, narrow FM, 205 DPL.
What scanner do I need to listen to fire and EMS in Scopus?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Scopus?
For Scopus, start with the Marble Hill 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.19375, 769.41875, 769.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.