Skip to content

Benton County Fire and EMS Frequencies

Benton County in Missouri has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Benton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Benton County: Lakeview Heights Fire 154.1450 MHz, narrow FM, 156.7 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Benton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County Fire Expired: Expired 12/24Benton County Fire – Dispatch159.1500FMNWQBT495
Deer Creek Township FireDeer Creek Township Fire – Dispatch /Operations *151.0025
In 159.0750
RAN 5NXDN96 EncryptedWQTM419
Lakeview Heights FireLakeview Heights Fire – Dispatch / Operations *154.1450
In 150.8050
156.7 PLFMNWPLS332

Radio system sites in Benton County

Program the control channel first; your scanner finds the voice channels from it.

Cole Camp · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 7 (hex 7) · NAC 1C6
Control 169.6625, 171.2625
Voice 155.5725, 159.3825, 171.65
Warsaw 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 20 (hex 14) · NAC 1C5
Control 773.03125, 773.28125
Voice 773.53125, 773.78125, 774.03125, 774.28125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Benton County

Common questions

What frequency does the fire department use in Benton County?

Fire dispatch channels listed for Benton County: Lakeview Heights Fire 154.1450 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Benton County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.

What are the control channels for trunked radio in Benton County?

For Benton County, start with the Cole Camp site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 169.6625, 171.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Benton County fire and EMS frequencies encrypted?

1 of the 3 conventional frequencies listed for Benton County are marked encrypted; a scanner cannot decode encrypted audio.