About Millard Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Millard: Adair County EMS 154.9650 MHz, narrow FM, 162.2 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Adair County channels that also cover Millard
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adair County EMS | Adair County EMS – Dispatch (Kirksville) | 154.9650 In 158.9250 | 162.2 PL | FMN | WNCD569 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Northeast Regional Medical Center / Kirksville Hospital | Patient Reports | 155.3400 | CSQ | FMN | KTK775 |
| Northeast Regional Medical Center / Kirksville Hospital | Patient Reports (was 162.2?) | 155.3400 | 88.5 PL | FMN | KTK775 |
Nearest trunked radio sites
Distances are measured from the center of Millard.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Millard?
We do not have a EMS dispatch channel listed specifically for Millard. The county-level EMS dispatch channels in the same county: Adair County EMS 154.9650 MHz, narrow FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Millard?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Millard?
For Millard, start with the La Plata 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.04375 MHz. Program a control channel first; the scanner finds the voice channels from it.