Skip to content

Wilkinson County Fire and EMS Frequencies

Wilkinson County in Mississippi has 2 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Wilkinson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wilkinson County: Wilkinson County Fire 154.3250 MHz, narrow FM, 156.7 PL. EMS dispatch for Wilkinson County: Medical Support & Facilities 151.0550 MHz, narrow FM, 412 DPL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Wilkinson County Fire talkgroup 37587 (hex 92d3).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wilkinson County, start with the Pinckneyville site of Mississippi Wireless Information Network (MSWIN). Its control channels: 774.30625, 774.55625, 774.80625 MHz.

Data updated .

Wilkinson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wilkinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkinson County FireWilkinson County Fire – Dispatch (Countywide)154.3250
In 150.8050
156.7 PLFMNKXG820

EMS Dispatch

EMS Dispatch frequencies for Wilkinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesMetro – Rural Ambulance151.0550
In 158.8200
412 DPLFMNWPXA793

Wilkinson County trunked talkgroups

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Wilkinson County FireCounty Fire – Primary3758792d3T
Wilkinson County FireCounty Fire – Fireground3758892d4T
Wilkinson County FireCounty Fire – Fireground3758992d5T
Wilkinson County FireCounty Fire – Fireground3759092d6T

Radio system sites in Wilkinson County

Program the control channel first; your scanner finds the voice channels from it.

Pinckneyville · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 25 (hex 19) · NAC 2A0
Control 774.30625, 774.55625, 774.80625
Voice 772.73125, 774.05625
Wilkinson County · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 26 (hex 1A)
Control 774.28125, 774.53125, 774.78125
Voice 771.18125, 774.03125
Doloroso · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 41 (hex 29) · NAC 2A0
Control 773.28125, 773.53125, 773.78125
Voice 770.30625, 773.03125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wilkinson County

Common questions

What frequency does the fire department use in Wilkinson County?

Fire dispatch channels listed for Wilkinson County: Wilkinson County Fire 154.3250 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Wilkinson County?

EMS dispatch channels listed for Wilkinson County: Medical Support & Facilities 151.0550 MHz, narrow FM, 412 DPL.

Do fire departments and EMS use a trunked radio system in Wilkinson County?

Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wilkinson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wilkinson County?

For Wilkinson County, start with the Pinckneyville site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.30625, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wilkinson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Wilkinson County are marked encrypted.

Are Wilkinson County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Wilkinson County are marked encrypted.