About Washington County Fire and EMS Frequencies
Quick answer: Fire dispatch for Washington County: Riverside Fire District 154.4000 MHz, narrow FM, no tone. EMS dispatch for Washington County: Washington County EMS 154.1450 MHz, narrow FM, 152 DPL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Washington County Fire talkgroup 58881 (hex e601).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Washington County, start with the Greenville site of Mississippi Wireless Information Network (MSWIN). Its control channels: 770.44375, 770.69375, 770.94375 MHz.
Data updated .
Washington County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Riverside Fire District | Riverside FIre DIstrict | 154.4000 In 153.7700 | FMN | WQDT378 | |
| Riverside Fire District | Riverside FIre North Repeater | 453.0500 In 458.0500 | 173.8 PL | FMN | WQPZ776 |
| Riverside Fire District | Riverside FIre South Repeater | 460.6000 In 465.6000 | 173.8 PL | FMN | WNUN834 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | MedSTAT EMS – Dispatch | 154.1450 In 158.8425 | 152 DPL | FMN | WQSD641 |
Washington County trunked talkgroups
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington County Fire | County Fire Dispatch | 58881 | e601 | T |
| Washington County Fire | Riverside Fire Main | 58942 | e63e | T |
| Washington County Fire | Indian Mound Fire Main | 58950 | e646 | T |
| Washington County Fire | Riverside Fire Tactical | 58943 | e63f | T |
| Washington County Fire | Indian Mound Fire Tactical | 58951 | e647 | T |
| Washington County EMS | County EMR Dispatch | 58954 | e64a | T |
| Washington County EMS | County EMR Tactical | 58955 | e64b | T |
| Washington County EMS | County EMR Tactical | 58956 | e64c | T |
| Washington County EMS | County EMR Tactical | 58957 | e64d | T |
| Washington County EMS | County EMR Tactical | 58958 | e64e | T |
| Washington County EMS | County EMR Tactical | 58959 | e64f | T |
Radio system sites in Washington County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Washington County
Common questions
What frequency does the fire department use in Washington County?
Fire dispatch channels listed for Washington County: Riverside Fire District 154.4000 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Washington County?
EMS dispatch channels listed for Washington County: Washington County EMS 154.1450 MHz, narrow FM, 152 DPL.
Do fire departments and EMS use a trunked radio system in Washington County?
Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Washington County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Washington County?
For Washington County, start with the Greenville site of Mississippi Wireless Information Network (MSWIN). Its control channels are 770.44375, 770.69375, 770.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Washington County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Washington County are marked encrypted.
Are Washington County fire and EMS talkgroups encrypted?
None of the 11 talkgroups listed for Washington County are marked encrypted.