About Walthall County Fire and EMS Frequencies
Quick answer: Fire dispatch for Walthall County: Walthall County Fire 154.2200 MHz, narrow FM, no tone. Trunked: Mississippi Wireless Information Network (MSWIN), for example Walthall County Fire talkgroup 36950 (hex 9056).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Walthall County, start with the Tylertown SE site of Mississippi Wireless Information Network (MSWIN). Its control channels: 774.31875, 774.56875, 774.81875 MHz.
Data updated .
Walthall County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walthall County Fire | Enon Volunteer Fire Department | 154.2200 | FMN | WNRZ871 | |
| Walthall County Fire | Lexie Volunteer Fire Department *License Expired* | 154.2650 | 411 DPL | FMN | WPGK322 |
| Walthall County Fire | District 3 Volunteer Fire Department | 154.3250 | FMN | WQOM475 | |
| Walthall County Fire | Walthall County Fire – Dispatch | 155.9400 In 159.0450 | 411 DPL | FMN | WPDP837 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walthall County Fire | Fire Common | 154.2050 In 153.8900 | FMN | WNUS625 | |
| Walthall County Fire | County Fire Tactical | 154.4450 | FMN | WPRR767 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walthall County General Hospital | Opertaions | 155.1750 | FMN | KRP837 | |
| Walthall County General Hospital | EMS Patient Reports | 155.3400 | FMN | KRP837 |
Walthall County trunked talkgroups
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Walthall County Fire | County Fire – Dispatch | 36950 | 9056 | T |
Radio system sites in Walthall County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Walthall County
Common questions
What frequency does the fire department use in Walthall County?
Fire dispatch channels listed for Walthall County: Walthall County Fire 154.2200 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Walthall County?
Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Walthall County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Walthall County?
For Walthall County, start with the Tylertown SE site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.31875, 774.56875, 774.81875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Walthall County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Walthall County are marked encrypted.
Are Walthall County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Walthall County are marked encrypted.