Skip to content

Scott County Fire and EMS Frequencies

Scott County in Mississippi has 1 countywide conventional frequency and 8 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Scott County Fire and EMS Frequencies

Quick answer: Fire dispatch for Scott County: Scott County Fire 154.8600 MHz, narrow FM, 110.9 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Scott County Fire talkgroup 46936 (hex b758).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Scott County, start with the Morton site of Mississippi Wireless Information Network (MSWIN). Its control channels: 769.40625, 769.65625, 769.90625 MHz.

Data updated .

Scott County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Scott County FireCounty Fire/EMS Dispatch154.8600
In 158.9400
110.9 PLFMNWQDH373

Scott County trunked talkgroups

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Scott County FireCounty Fire & EMS – Dispatch46936b758T
Scott County FireCounty Fire – Fireground46937b759T
Scott County FireCounty Fire – Fireground46938b75aT
Scott County FireHomewood Volunteer Fire Department46940b75cT
Scott County FireLiberty Volunteer Fire Department46941b75dT
Scott County FireNorth Central Volunteer Fire Department46942b75eT
Scott County FireLake Volunteer Fire Department46944b760T
Scott County FireLudlow Volunteer Fire Department46945b761T

Radio system sites in Scott County

Program the control channel first; your scanner finds the voice channels from it.

Morton · Mississippi Wireless Information Network (MSWIN)
RFSS 2 · Site 37 (hex 25) · NAC 2A4
Control 769.40625, 769.65625, 769.90625
Voice 769.15625, 770.33125, 771.33125, 771.58125, 772.08125, 772.60625, 772.98125, 774.44375, 774.88125
Lake · Mississippi Wireless Information Network (MSWIN)
RFSS 2 · Site 38 (hex 26)
Control 769.43125, 769.68125, 769.93125
Voice 769.18125, 771.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Scott County

Common questions

What frequency does the fire department use in Scott County?

Fire dispatch channels listed for Scott County: Scott County Fire 154.8600 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Scott County?

Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Scott County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Scott County?

For Scott County, start with the Morton site of Mississippi Wireless Information Network (MSWIN). Its control channels are 769.40625, 769.65625, 769.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Scott County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Scott County are marked encrypted.

Are Scott County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Scott County are marked encrypted.