About Lambert Fire and EMS Frequencies
Quick answer: Fire dispatch for Lambert: Lambert Fire 154.4150 MHz, narrow FM, 156.7 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Quitman County Fire talkgroup 56270 (hex dbce).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lambert, start with the MDOT Coahoma site of Mississippi Wireless Information Network (MSWIN), about 10 miles away. Its control channels: 774.28125, 774.53125, 774.78125 MHz.
Data updated .
Lambert conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lambert Fire | Lambert Fire Department Dispatch | 154.4150 | 156.7 PL | FMN | WNGX423 |
| Lambert Fire | Lambert Fire Digital Operations | 154.4150 | DMR | WNGX423 |
Quitman County channels that also cover Lambert
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Quitman County Fire | Quitman County EOC Fire Dispatch | 154.1900 In 150.8050 | 179.9 PL | FMN | WNZR528 |
| Quitman County Fire | Quitman County EMA Fire Fixed UHF Links | 460.0750 | FMN | WNZR528 |
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Quitman County Fire | County Fire – Dispatch | 56270 | dbce | T |
| Quitman County Fire | County Fire – Fireground | 56271 | dbcf | T |
| Quitman County Fire | County Fire – Fireground | 56272 | dbd0 | T |
| Quitman County Fire | County Fire – Fireground | 56273 | dbd1 | T |
| Quitman County Fire | Crowder Volunteer Fire Department | 56274 | dbd2 | T |
| Quitman County Fire | Lambert Volunteer Fire Department | 56275 | dbd3 | T |
| Quitman County Fire | Marks Volunteer Fire Department | 56276 | dbd4 | T |
| Quitman County Fire | Sledge Volunteer Fire Department | 56277 | dbd5 | T |
Nearest trunked radio sites
Distances are measured from the center of Lambert.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lambert?
Fire dispatch channels listed for Lambert: Lambert Fire 154.4150 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Lambert?
Yes. The county-level systems that cover Lambert are Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lambert?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lambert?
For Lambert, start with the MDOT Coahoma site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.28125, 774.53125, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lambert fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Lambert are marked encrypted.