Skip to content

Pike County Fire and EMS Frequencies

Pike County in Mississippi has 8 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Pike County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pike County: Pike County Fire 151.1075 MHz, narrow FM, 206.5 PL. EMS dispatch for Pike County: AAA Ambulance Service 154.8450 MHz, narrow FM, 612 DPL; Southwest Mississippi Regional Medical Center 155.3550 MHz, narrow FM, no tone. Trunked: Mississippi Wireless Information Network (MSWIN), for example Pike County Fire talkgroup 36279 (hex 8db7).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pike County, start with the Quin site of Mississippi Wireless Information Network (MSWIN). Its control channels: 769.40625, 769.65625, 769.90625 MHz.

Data updated .

Pike County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FireMcComb/Pike County Emergency Management/Fire – Dispatch151.1075
In 156.0225
206.5 PLFMNWQKH717

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FireSunny Hill Volunteer Fire Department Fireground (TRBO153.8750DMRWPSQ647
Pike County FireMcComb/Pike EOC Fireground154.1750FMNWNCP452
Pike County FireUnknown Volunteer Fire Department Private/Fireground156.0075FMNWPTR574
Pike County FireFernwood Volunteer Fire Department Private/Fireground156.0150156.7 PLFMNWPTS297
Pike County FireFriendship Volunteer Fire Department Private/Fireground158.8350156.7 PLFMNWPTR574

EMS Dispatch

EMS Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AAA Ambulance ServiceDispatch McComb154.8450
In 151.0025
612 DPLFMNWQIM778
Southwest Mississippi Regional Medical CenterSouthwest Mississippi Regional Medical Center – Dispatch155.3550FMNKUY267

Pike County trunked talkgroups

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Pike County FireCounty Fire Dispatch362798db7T
Pike County FireCounty Fireground362808db8T
Pike County FireCounty Fireground362818db9T
Pike County FireCounty Fireground362828dbaT
Pike County FireCounty Fireground362838dbbT
Pike County FireCounty Fireground362848dbcT
Pike County FireFriendship Fire Department362858dbdT
Pike County FireSunny Hill Fire Department362878dbfT
Pike County FireProgress Fire Department362908dc2T

Radio system sites in Pike County

Program the control channel first; your scanner finds the voice channels from it.

Quin · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 28 (hex 1C) · NAC 2A1
Control 769.40625, 769.65625, 769.90625
Voice 769.15625, 769.21875, 773.48125, 773.93125
Osyka · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 56 (hex 38) · NAC 2A3
Control 770.78125, 771.68125, 771.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pike County

Common questions

What frequency does the fire department use in Pike County?

Fire dispatch channels listed for Pike County: Pike County Fire 151.1075 MHz, narrow FM, 206.5 PL.

What frequency does EMS or the ambulance service use in Pike County?

EMS dispatch channels listed for Pike County: AAA Ambulance Service 154.8450 MHz, narrow FM, 612 DPL; Southwest Mississippi Regional Medical Center 155.3550 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Pike County?

Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pike County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pike County?

For Pike County, start with the Quin site of Mississippi Wireless Information Network (MSWIN). Its control channels are 769.40625, 769.65625, 769.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pike County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Pike County are marked encrypted.

Are Pike County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Pike County are marked encrypted.