Skip to content

Noxubee County Fire and EMS Frequencies

Noxubee County in Mississippi has 1 countywide conventional frequency and 4 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Noxubee County Fire and EMS Frequencies

Quick answer: Trunked: Noxubee County P25 (Project 25), for example Noxubee County Fire talkgroup 3106 (hex c22).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Noxubee County P25 (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Noxubee County, start with the Macon site of Noxubee County P25. Its control channels: 851.5625, 852.4, 852.675 MHz.

Data updated .

Noxubee County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Noxubee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noxubee County FireCounty Fire/Emergency Management Dispatch/Tone Out155.0250
In 153.9800
110.9 PLFMNWNVH249

Noxubee County trunked talkgroups

Noxubee County P25

Project 25

Noxubee County P25 talkgroups
AgencyDescriptionTalkgroupHexMode
Noxubee County FireDistrict 2 Fire Department3106c22D
Noxubee County FireMashulaville Fire Department3107c23D
Noxubee County FireSouthwest Fire Department3108c24D
Noxubee County EMSCounty EMS Dispatch3109c25D

Radio system sites in Noxubee County

Program the control channel first; your scanner finds the voice channels from it.

Macon · Noxubee County P25
Project 25 · RFSS 9 · Site 9 (hex 9) · NAC 00A
Control 851.5625, 852.4, 852.675, 852.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Noxubee County

Common questions

Do fire departments and EMS use a trunked radio system in Noxubee County?

Yes. Fire and EMS talkgroups are listed for Noxubee County P25 (Project 25): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Noxubee County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Noxubee County?

For Noxubee County, start with the Macon site of Noxubee County P25. Its control channels are 851.5625, 852.4, 852.675, 852.925 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Noxubee County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Noxubee County are marked encrypted.

Are Noxubee County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Noxubee County are marked encrypted.