About Hancock County Fire and EMS Frequencies
Quick answer: Trunked: Mississippi Wireless Information Network (MSWIN), for example Hancock County Fire talkgroup 32387 (hex 7e83).
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hancock County, start with the Necaise Crossing site of Mississippi Wireless Information Network (MSWIN). Its control channels: 774.30625, 774.55625, 774.80625 MHz.
Data updated .
Hancock County trunked talkgroups
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | County Fire/EMS Dispatch | 32387 | 7e83 | T |
| Hancock County Fire | County Fire/EMS Fireground | 32400 | 7e90 | T |
Radio system sites in Hancock County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hancock County
Common questions
Do fire departments and EMS use a trunked radio system in Hancock County?
Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hancock County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hancock County?
For Hancock County, start with the Necaise Crossing site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.30625, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hancock County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Hancock County are marked encrypted.