Skip to content

George County Fire and EMS Frequencies

George County in Mississippi has 4 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About George County Fire and EMS Frequencies

Quick answer: Fire dispatch for George County: George County Fire 155.1450 MHz, narrow FM, 136.5 PL. EMS dispatch for George County: George County EMS 151.0400 MHz, narrow FM, 123.0 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example George County EMS talkgroup 31855 (hex 7c6f).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For George County, start with the Lucedale site of Mississippi Wireless Information Network (MSWIN). Its control channels: 770.45625, 770.70625, 770.95625 MHz.

Data updated .

George County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for George County
AgencyDescriptionFrequency (MHz)ToneModeFCC
George County FireGeorge County Fire – Dispatch155.1450
In 153.8300
136.5 PLFMNWPAU862

Fire Talk-around

Fire Talk-around frequencies for George County
AgencyDescriptionFrequency (MHz)ToneModeFCC
George County FireVolunteer Fire Department Talkaround154.4450
In 153.9800
136.5 PLFMNWPAU862

EMS Dispatch

EMS Dispatch frequencies for George County
AgencyDescriptionFrequency (MHz)ToneModeFCC
George County EMSGeorge County EMS – Dispatch151.0400
In 159.0600
123.0 PLFMNWPMQ782
George County EMSCivil Defense EMS Net155.2650FMNKUG668

George County trunked talkgroups

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
George County EMSGeorge County EMS – Dispatch318557c6fT

Radio system sites in George County

Program the control channel first; your scanner finds the voice channels from it.

Lucedale · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 19 (hex 13)
Control 770.45625, 770.70625, 770.95625
Voice 770.20625, 771.86875, 772.83125
Benndale · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 20 (hex 14) · NAC 2A3
Control 774.08125, 774.33125, 774.58125, 774.83125
Voice 773.58125, 773.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in George County

Common questions

What frequency does the fire department use in George County?

Fire dispatch channels listed for George County: George County Fire 155.1450 MHz, narrow FM, 136.5 PL.

What frequency does EMS or the ambulance service use in George County?

EMS dispatch channels listed for George County: George County EMS 151.0400 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in George County?

Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in George County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in George County?

For George County, start with the Lucedale site of Mississippi Wireless Information Network (MSWIN). Its control channels are 770.45625, 770.70625, 770.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are George County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for George County are marked encrypted.

Are George County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for George County are marked encrypted.