About Benton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Benton County: Benton County Fire 151.0550 MHz, narrow FM, 241.8 PL. Trunked: Mississippi Wireless Information Network (MSWIN), for example Benton County Fire talkgroup 50736 (hex c630).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Benton County, start with the Hickory Flat site of Mississippi Wireless Information Network (MSWIN). Its control channels: 769.44375, 769.69375, 769.94375 MHz.
Data updated .
Benton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire | County Fire – Dispatch | 151.0550 In 156.1350 | 241.8 PL | FMN | — |
| Benton County Fire | Snow Lake Fire District | 151.9550 | FMN | WNKU817 | |
| Benton County Fire | County Fire – Dispatch 1 *Expired* | 155.8800 In 158.8800 | 210.7 PL | FMN | KKL511 |
Benton County trunked talkgroups
Mississippi Wireless Information Network (MSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Benton County Fire | County Fire Dispatch | 50736 | c630 | T |
| Benton County Fire | County Fireground | 50738 | c632 | T |
Radio system sites in Benton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Benton County
Common questions
What frequency does the fire department use in Benton County?
Fire dispatch channels listed for Benton County: Benton County Fire 151.0550 MHz, narrow FM, 241.8 PL.
Do fire departments and EMS use a trunked radio system in Benton County?
Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Benton County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Benton County?
For Benton County, start with the Hickory Flat site of Mississippi Wireless Information Network (MSWIN). Its control channels are 769.44375, 769.69375, 769.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Benton County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Benton County are marked encrypted.
Are Benton County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Benton County are marked encrypted.