Skip to content

Amite County Fire and EMS Frequencies

Amite County in Mississippi has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Amite County Fire and EMS Frequencies

Quick answer: EMS dispatch for Amite County: Amite County EMS 154.9950 MHz, narrow FM, no tone. Trunked: Mississippi Wireless Information Network (MSWIN), for example Amite County Fire talkgroup 30416 (hex 76d0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Amite County, start with the Liberty site of Mississippi Wireless Information Network (MSWIN). Its control channels: 773.33125, 773.58125, 773.83125 MHz.

Data updated .

Amite County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Amite County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Amite County EMSAmerican Medical Response (AMR) Gloster Dispatch154.9950
In 159.1425
FMNWPKC654

Amite County trunked talkgroups

Mississippi Wireless Information Network (MSWIN)

Mississippi Wireless Information Network (MSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Amite County FireCounty Fire Dispatch3041676d0T

Radio system sites in Amite County

Program the control channel first; your scanner finds the voice channels from it.

Liberty · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 27 (hex 1B) · NAC 2A0
Control 773.33125, 773.58125, 773.83125
Voice 770.03125, 773.08125
Gloster · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 42 (hex 2A) · NAC 2A1
Control 770.40625, 770.65625, 770.90625
Voice 770.15625, 772.15625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Amite County

Common questions

What frequency does EMS or the ambulance service use in Amite County?

EMS dispatch channels listed for Amite County: Amite County EMS 154.9950 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Amite County?

Yes. Fire and EMS talkgroups are listed for Mississippi Wireless Information Network (MSWIN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Amite County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Amite County?

For Amite County, start with the Liberty site of Mississippi Wireless Information Network (MSWIN). Its control channels are 773.33125, 773.58125, 773.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Amite County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Amite County are marked encrypted.

Are Amite County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Amite County are marked encrypted.