Skip to content

Adams County Fire and EMS Frequencies

Adams County in Mississippi has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Adams County Fire and EMS Frequencies

Quick answer: EMS dispatch for Adams County: Adams County EMS 151.0550 MHz, narrow FM, 412 DPL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Adams County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireCountywide Fire155.0400
In 158.8950
FMNWQGL881
Adams County FireCountywide Fire453.6750
In 458.6750
FMNWQGL881

EMS Dispatch

EMS Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County EMSMetro – Rural Ambulance151.0550
In 158.8200
412 DPLFMNWPXA793
Adams County EMSAir Evac Lifeteam Medevac Helicopters153.3200
In 159.9600
226 DPLFMNWQOA971
Adams County EMSAmerican Medical Response (AMR) Natchez Dispatch155.3250
In 150.7750
179.9 PLFMNWPKC654

Radio system sites in Adams County

Program the control channel first; your scanner finds the voice channels from it.

Jeanette · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 38 (hex 26) · NAC 2A1
Control 774.29375, 774.54375, 774.79375
Voice 769.33125, 774.04375
Natchez North · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 39 (hex 27) · NAC 2A1
Control 774.31875, 774.56875, 774.81875
Voice 771.73125, 773.04375, 774.06875
Natchez South · Mississippi Wireless Information Network (MSWIN)
RFSS 1 · Site 40 (hex 28) · NAC 2A2
Control 769.46875, 769.71875, 769.96875
Voice 769.21875, 773.43125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Adams County

Common questions

What frequency does EMS or the ambulance service use in Adams County?

EMS dispatch channels listed for Adams County: Adams County EMS 151.0550 MHz, narrow FM, 412 DPL.

What scanner do I need to listen to fire and EMS in Adams County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Adams County?

For Adams County, start with the Jeanette site of Mississippi Wireless Information Network (MSWIN). Its control channels are 774.29375, 774.54375, 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Adams County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Adams County are marked encrypted.