Skip to content

Wilkin County Fire and EMS Frequencies

Wilkin County in Minnesota has 5 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Wilkin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wilkin County: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL. EMS dispatch for Wilkin County: Wilkin County EMS 155.6175 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wilkin County Fire talkgroup 27701 (hex 6c35).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wilkin County, start with the Breckenridge site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 857.0375, 859.1125 MHz.

Data updated .

Wilkin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County FireCounty Fire Paging – Patch154.4150
In 150.7900
110.9 PLFMNWPYM765
Wilkin County FireFoxhome Fire Paging154.4300107.2 PLFMNWQCP502

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County FireBreckenridge Fire154.3850110.9 PLFMNWPMY682

EMS Dispatch

EMS Dispatch frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County EMSASI EMS155.6175FMNWQVL562

Hospitals & Medical

Hospitals & Medical frequencies for Wilkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilkin County HospitalSt. Francis Hospital155.3550186.2 PLFMNWQDV418

Wilkin County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wilkin County FireFire EMS Dispatch277016c35D

Radio system sites in Wilkin County

Program the control channel first; your scanner finds the voice channels from it.

Breckenridge · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 5 (hex 5) · NAC 405
Control 857.0375, 859.1125
Voice 854.0125, 854.4875, 856.0125
Nashua · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 25 (hex 19) · NAC 40e
Control 852.4, 852.9
Voice 851.95, 853.5, 859.2625
Kent - Foxhome · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 77 (hex 4D) · NAC 40F
Control 851.9125, 853.4125
Voice 851.4125, 855.7375, 857.4375
Comstock · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 88 (hex 58) · NAC 400
Control 852.4875, 855.9875
Voice 851.9875, 852.15, 857.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wilkin County

Common questions

What frequency does the fire department use in Wilkin County?

Fire dispatch channels listed for Wilkin County: Wilkin County Fire 154.4150 MHz, narrow FM, 110.9 PL.

What frequency does EMS or the ambulance service use in Wilkin County?

EMS dispatch channels listed for Wilkin County: Wilkin County EMS 155.6175 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Wilkin County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wilkin County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wilkin County?

For Wilkin County, start with the Breckenridge site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.0375, 859.1125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wilkin County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Wilkin County are marked encrypted.

Are Wilkin County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Wilkin County are marked encrypted.