Skip to content

Traverse County Fire and EMS Frequencies

Traverse County in Minnesota has 4 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Traverse County Fire and EMS Frequencies

Quick answer: Fire dispatch for Traverse County: Traverse County Fire 154.2800 MHz, narrow FM, no tone. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Traverse County Fire talkgroup 26711 (hex 6857).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Traverse County, start with the Browns Valley site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 854.9875, 856.2375 MHz.

Data updated .

Traverse County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Traverse County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Traverse County FireTraverse County Fire – Paging154.2800
In 150.8050
FMNWPXA815
Traverse County FireTraverse County Fire – Paging154.9650FMNKNFM406
Traverse County FireTraverse County Fire – Paging155.0850
In 158.8650
179.9 PLFMNWNRZ764

Hospitals & Medical

Hospitals & Medical frequencies for Traverse County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Traverse County HospitalWheaton Community Hosp.155.3550151.4 PLFMNKRS324

Traverse County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Traverse County FireTraverse County Fire – Dispatch – 155.085 – 154.280 VHF267116857D
Traverse County FireTraverse Fire(1)26718685eD
Traverse County FireTraverse Fire(2)26719685fD
Traverse County FireTraverse Fire(3)267206860D
Traverse County FireTraverse Fire(4)267236863D
Traverse County FireTraverse Fire(5)267246864D

Radio system sites in Traverse County

Program the control channel first; your scanner finds the voice channels from it.

Browns Valley · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 2 (hex 2) · NAC 409
Control 854.9875, 856.2375
Voice 857.2375, 858.2375, 859.2375, 860.2375
Wheaton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 18 (hex 12) · NAC 40B
Control 859.7625, 860.7625
Voice 855.9625, 856.7625, 857.7625, 858.7625
Dumont · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 78 (hex 4E) · NAC 403
Control 851.45, 851.875
Voice 853.45, 858.9625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Traverse County

Common questions

What frequency does the fire department use in Traverse County?

Fire dispatch channels listed for Traverse County: Traverse County Fire 154.2800 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Traverse County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Traverse County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Traverse County?

For Traverse County, start with the Browns Valley site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9875, 856.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Traverse County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Traverse County are marked encrypted.

Are Traverse County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Traverse County are marked encrypted.