Skip to content

Stevens County Fire and EMS Frequencies

Stevens County in Minnesota has 5 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Stevens County Fire and EMS Frequencies

Quick answer: Fire dispatch for Stevens County: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL. EMS dispatch for Stevens County: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Stevens County Fire talkgroup 26332 (hex 66dc).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stevens County, start with the Morris site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.4375, 855.2375 MHz.

Data updated .

Stevens County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County FireStevens County Fire – Paging155.7600123.0 PLFMNKDR727

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County FireCounty Fire154.3700127.3 PLFMNWNJP947

EMS Dispatch

EMS Dispatch frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County EMSEMS Paging154.1150
In 159.4500
173.8 PLFMNWPLZ657

EMS Talk-around

EMS Talk-around frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County EMSFirst Responders – Armer LINK853.0125
In 808.0125
FMWQWT815

Hospitals & Medical

Hospitals & Medical frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County HospitalStevens Community Medical Center155.3550136.5 PLFMNKWM800

Stevens County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Stevens County FireFire Paging – 155.760 VHF2633266dcD
Stevens County FireStevens County Fire – Dispatch2633866e2D
Stevens County EMSStevens County EMS – Dispatch – 154.115 VHF2634966edD

Radio system sites in Stevens County

Program the control channel first; your scanner finds the voice channels from it.

Morris · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 14 (hex E) · NAC 40E
Control 851.4375, 855.2375
Voice 851.9375, 852.4375, 852.9375, 853.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Stevens County

Common questions

What frequency does the fire department use in Stevens County?

Fire dispatch channels listed for Stevens County: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Stevens County?

EMS dispatch channels listed for Stevens County: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Stevens County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stevens County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stevens County?

For Stevens County, start with the Morris site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4375, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stevens County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Stevens County are marked encrypted.

Are Stevens County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Stevens County are marked encrypted.