About Steele County Fire and EMS Frequencies
Quick answer: Fire dispatch for Steele County: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL. EMS dispatch for Steele County: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Steele County Fire talkgroup 22416 (hex 5790).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Steele County, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 854.6375, 858.9375 MHz.
Data updated .
Steele County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County Fire | Fire Paging-Ellendale | 150.9950 In 159.0450 | 136.5 PL | FMN | WQVZ793 |
| Steele County Fire | Fire Paging-Blooming Prairie | 154.0400 In 158.8800 | 136.5 PL | FMN | WQVZ793 |
| Steele County Fire | Fire Paging-Owatonna | 154.1750 In 153.7700 | 136.5 PL | FMN | WQVZ793 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County EMS | Gold Cross EMS | 155.2800 | 136.5 PL | FMN | WNMP639 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steele County Hospital | Owatonna Hospital | 155.3850 | 131.8 PL | FMN | KIG600 |
Steele County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steele County Fire | Steele Co Fire Main | 22416 | 5790 | D |
Radio system sites in Steele County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Steele County
Common questions
What frequency does the fire department use in Steele County?
Fire dispatch channels listed for Steele County: Steele County Fire 150.9950 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Steele County?
EMS dispatch channels listed for Steele County: Steele County EMS 155.2800 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Steele County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Steele County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Steele County?
For Steele County, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Steele County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Steele County are marked encrypted.
Are Steele County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Steele County are marked encrypted.