Skip to content

Scott County Fire and EMS Frequencies

Scott County in Minnesota has 2 countywide conventional frequencies and 17 countywide talkgroups in our database. Use the list of 17 cities and communities below for local fire departments and EMS agencies.

About Scott County Fire and EMS Frequencies

Quick answer: Fire dispatch for Scott County: Scott County Fire 154.1450 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Scott County Fire talkgroup 4814 (hex 12ce).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Scott County, start with the Shakopee - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 856.7375, 859.2125 MHz.

Data updated .

Scott County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Scott County FireFire Paging154.1450136.5 PLFMNKWM573

Hospitals & Medical

Hospitals & Medical frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Scott County HospitalQueen of Peace Hospital – New Prague155.3550103.5 PLFMNWPNU502

Scott County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Scott County FireMdewakanton Sioux Fire – EMS Dispatch481412ceD
Scott County FireFire Department ROAM4892131cD
Scott County FireMdewakanton Med Sioux Fire Tactical481612d0D
Scott County FireMdewakanton Sioux Med Fire Tactical481812d2D
Scott County FireMdewakanton Sioux MW Operations482012d4D
Scott County FireScott County Fire – Fire Ground4874130aD
Scott County FireScott County Fire – Fire Ground4876130cD
Scott County FireScott County Fire – Fire Ground4878130eD
Scott County FireScott County Fire – Fire Ground48801310D
Scott County FireScott County Fire – Fire Ground48821312D
Scott County FireScott County Fire – Fire Ground48841314D
Scott County FireScott County Fire – Fire Ground48861316D
Scott County FireScott County Fire – Fire Ground48881318D
Scott County FireBelle Plain Fire T2T4894131eD
Scott County FireFire Department Interop4890131aD
Scott County EMSCounty Fire Dispatch481212ccD
Scott County HospitalQueen of Peace Hospital49181336D

Radio system sites in Scott County

Program the control channel first; your scanner finds the voice channels from it.

Shakopee - Prison · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 98 (hex 62)
Control 856.7375, 859.2125
Voice 854.9625, 857.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Scott County

Common questions

What frequency does the fire department use in Scott County?

Fire dispatch channels listed for Scott County: Scott County Fire 154.1450 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Scott County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Scott County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Scott County?

For Scott County, start with the Shakopee - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.7375, 859.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Scott County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Scott County are marked encrypted.

Are Scott County fire and EMS talkgroups encrypted?

None of the 17 talkgroups listed for Scott County are marked encrypted.