About Rice County Fire and EMS Frequencies
Quick answer: Fire dispatch for Rice County: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL. EMS dispatch for Rice County: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rice County Fire talkgroup 22621 (hex 585d).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rice County, start with the Lonsdale site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.375, 851.975, 852.3 MHz.
Data updated .
Rice County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice County Fire | Lonsdale Fire – Paging-Backup | 151.2800 | 466 DPL | FMN | — |
| Rice County Fire | Morristown Fire – Paging-Backup | 151.2800 | 423 DPL | FMN | — |
| Rice County Fire | Northfield Fire – Paging-Backup | 151.2800 | 413 DPL | FMN | — |
| Rice County Fire | Rice County Fire – Paging | 154.1600 In 151.0850 | 136.5 PL | FMN | WQDX262 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice County EMS | District One Hospital Regional EMS | 155.3850 | 85.4 PL | FMN | KVF461 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice County Hospital | District One Hospital | 155.3850 | 103.5 PL | FMN | KVF461 |
Rice County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rice County Fire | County Fire Main | 22621 | 585d | D |
| Rice County Fire | Rice Fire Tactical | 22637 | 586d | D |
| Rice County Fire | Rice Fire Tactical | 22638 | 586e | D |
| Rice County Fire | Rice County Fire Operations | 22640 | 5870 | D |
| Rice County Fire | Rice County Fire Operations | 22641 | 5871 | D |
| Rice County Fire | Fairbault Fire | 22622 | 585e | D |
Radio system sites in Rice County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Rice County
Common questions
What frequency does the fire department use in Rice County?
Fire dispatch channels listed for Rice County: Rice County Fire 151.2800 MHz, narrow FM, 466 DPL.
What frequency does EMS or the ambulance service use in Rice County?
EMS dispatch channels listed for Rice County: Rice County EMS 155.3850 MHz, narrow FM, 85.4 PL.
Do fire departments and EMS use a trunked radio system in Rice County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rice County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rice County?
For Rice County, start with the Lonsdale site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.375, 851.975, 852.3 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Rice County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Rice County are marked encrypted.
Are Rice County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Rice County are marked encrypted.