Skip to content

Renville County Fire and EMS Frequencies

Renville County in Minnesota has 2 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 34 cities and communities below for local fire departments and EMS agencies.

About Renville County Fire and EMS Frequencies

Quick answer: Fire dispatch for Renville County: Renville County Fire 153.8000 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Renville County Fire talkgroup 29509 (hex 7345).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Renville County, start with the Olivia site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.2375, 853.3875 MHz.

Data updated .

Renville County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County FireRenville County Fire – Paging153.8000
In 156.0150
CSQFMNKAO467

Hospitals & Medical

Hospitals & Medical frequencies for Renville County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Renville County HospitalRenville County Hospital155.4000114.8 PLFMNKNDV877

Renville County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Renville County FireFire EMS Paging – 153.800 VHF295097345D
Renville County FireFire EMS Dispatch295117347D
Renville County HospitalRenville County Hospital29515734bD

Radio system sites in Renville County

Program the control channel first; your scanner finds the voice channels from it.

Olivia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 79 (hex 4F)
Control 853.2375, 853.3875
Voice 851.325, 851.7125, 852.2
Danube · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 85 (hex 55) · NAC 405
Control 851.925, 856.7125
Voice 853.475, 853.8875, 858.7375, 859.7375
Hector · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 86 (hex 56)
Control 852.3875, 853.425
Voice 851.425, 851.75, 852.8875, 853.9125
Morton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 87 (hex 57)
Control 856.4875, 857.4875
Voice 851.3875, 852.475, 858.4875, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Renville County

Common questions

What frequency does the fire department use in Renville County?

Fire dispatch channels listed for Renville County: Renville County Fire 153.8000 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Renville County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Renville County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Renville County?

For Renville County, start with the Olivia site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.2375, 853.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Renville County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Renville County are marked encrypted.

Are Renville County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Renville County are marked encrypted.