About Kerrick Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kerrick: Pine County Fire 151.2275 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Kerrick Fire talkgroup 7229 (hex 1c3d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kerrick, start with the Moose Lake - Prison site of Allied Radio Matrix for Emergency Response (ARMER), about 11 miles away. Its control channels: 855.9625 MHz.
Data updated .
Kerrick trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kerrick Fire | Kerrick Fire | 7229 | 1c3d | D |
Pine County channels that also cover Kerrick
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Fire | Pine County Fire – Paging | 151.2275 | CSQ | FMN | WQPK405 |
| Pine County Fire | Pine County Fire – Dispatch | 154.1450 In 153.7700 | 192.8 PL | FMN | WNQA256 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Fire | Pine City Fire Tactical | 153.8900 | 192.8 PL | FMN | KNIV370 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pine County Hospital | Pine Medical Center – Sandstone | 155.3850 | 123.0 PL | FMN | WQDI847 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pine County Fire | Pine County Fire – Dispatch | 7207 | 1c27 | D |
| Pine County Fire | Pine County Fire – Fire Ground | 7208 | 1c28 | D |
| Pine County Fire | Pine Fire All | 7209 | 1c29 | D |
| Pine County Fire | Duxbury Fire | 7226 | 1c3a | D |
| Pine County EMS | Ambulance Main | 7211 | 1c2b | D |
| Pine County EMS | Welia Ambulance | 7212 | 1c2c | D |
| Pine County Hospital | Sandstone Hospital – Essentia Health | 7234 | 1c42 | D |
Nearest trunked radio sites
Distances are measured from the center of Kerrick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kerrick?
We do not have a fire dispatch channel listed specifically for Kerrick. The county-level fire dispatch channels in the same county: Pine County Fire 151.2275 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Kerrick?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kerrick?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kerrick?
For Kerrick, start with the Moose Lake - Prison site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 855.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kerrick fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Kerrick are marked encrypted.