About Olmsted County Fire and EMS Frequencies
Quick answer: Fire dispatch for Olmsted County: Olmsted County Fire 155.4900 MHz, narrow FM, no tone. EMS dispatch for Olmsted County: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Olmsted County Fire talkgroup 20448 (hex 4fe0).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Olmsted County, start with the Olmsted Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.5375, 853.5125, 853.6125 MHz.
Data updated .
Olmsted County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Olmsted County Fire | County Paging | 155.4900 In 156.0900 | FMN | KAB816 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Medical Support & Facilities | Gold Cross Ambulance Primary | 155.2800 | 141.3 PL | FMN | KDR729 |
| Medical Support & Facilities | Gold Cross Ambulance Backup | 155.3400 | 141.3 PL | FMN | KLX400 |
| Medical Support & Facilities | Mayo One Dispatch | 155.4000 | 162.2 PL | FMN | KLX400 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Medical Support & Facilities | Rochester Regional EMS | 155.3850 | 141.3 PL | FMN | KLX400 |
| Olmsted Medical Center | Olmsted Medical Center | 160.1550 | FMN | WQBF583 |
Olmsted County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Olmsted County Fire | Rochester Airport Fire Dispatch | 20448 | 4fe0 | D |
| Olmsted County Fire | Olmsted County Fire – Dispatch (154.370) | 20476 | 4ffc | D |
| Olmsted County Fire | County Fire Tactical | 20374 | 4f96 | D |
| Olmsted County Fire | Rochester Airport Fire Tactical | 20440 | 4fd8 | D |
| Olmsted County Fire | County Fire Operations | 20472 | 4ff8 | D |
| Olmsted County Fire | County Fire | 20494 | 500e | D |
| Olmsted County Fire | Fire Department 20464 | 20464 | 4ff0 | D |
| Olmsted County EMS | Rochester Methodist Hospital | 20598 | 5076 | D |
| Olmsted County EMS | Mayo – Rochester Dispatch | 21610 | 546a | D |
| Olmsted County EMS | Gold Cross – Rochester – Saint Marys | 21614 | 546e | D |
| Olmsted County EMS | Mayo – Rochester Operations | 21605 | 5465 | D |
| Olmsted County EMS | Mayo – Rochester Operations | 21612 | 546c | D |
| Olmsted County Hospital | Gold Cross Ambulance Dispatch – Rochester (simulcast of 155.2800) | 20434 | 4fd2 | D |
| Olmsted County Hospital | Mayo – Rochester Intercept | 21608 | 5468 | D |
Radio system sites in Olmsted County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Olmsted County
Common questions
What frequency does the fire department use in Olmsted County?
Fire dispatch channels listed for Olmsted County: Olmsted County Fire 155.4900 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Olmsted County?
EMS dispatch channels listed for Olmsted County: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Olmsted County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Olmsted County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Olmsted County?
For Olmsted County, start with the Olmsted Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.5375, 853.5125, 853.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Olmsted County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Olmsted County are marked encrypted.
Are Olmsted County fire and EMS talkgroups encrypted?
None of the 14 talkgroups listed for Olmsted County are marked encrypted.