About Mower County Fire and EMS Frequencies
Quick answer: EMS dispatch for Mower County: Mower County EMS 155.2050 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Mower County Fire talkgroup 22207 (hex 56bf).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mower County, start with the Elkton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 856.2375 MHz.
Data updated .
Mower County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mower County Fire | Mower County Fire – Fire Ground (including Austin, Brownsdale, Lyle) | 154.1450 | 97.4 PL | FMN | WPMJ464 |
| Mower County Fire | Brownsdale FIRE Department | 156.1425 In 153.9875 | FMN | WQNS579 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mower County EMS | Gold Cross Ambulance | 155.2050 | 141.3 PL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mower County Hospital | Austin Medical Center | 155.3850 | 136.5 PL | FMN | KNHB500 |
Mower County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mower County Fire | Mower County Fire – Dispatch | 22207 | 56bf | D |
| Mower County EMS | Mower County EMS – Dispatch | 22226 | 56d2 | D |
Radio system sites in Mower County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Mower County
Common questions
What frequency does EMS or the ambulance service use in Mower County?
EMS dispatch channels listed for Mower County: Mower County EMS 155.2050 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Mower County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mower County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mower County?
For Mower County, start with the Elkton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Mower County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Mower County are marked encrypted.
Are Mower County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Mower County are marked encrypted.