About Meeker County Fire and EMS Frequencies
Quick answer: Fire dispatch for Meeker County: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL. EMS dispatch for Meeker County: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Meeker County Fire talkgroup 25550 (hex 63ce).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Meeker County, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.225, 853.875 MHz.
Data updated .
Meeker County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meeker County Fire | Fire EMS Dispatch Paging | 154.4450 | 223 DPL | FMN | WSID438 |
| Meeker County Fire | Litchfield Fire Paging | 154.4450 | 123.0 PL | FMN | WSID438 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meeker County EMS | EMS Operations (Gold Cross Ambulance) | 155.2950 | 125 DPL | FMN | WPMV740 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meeker County Hospital | Meeker County Hospital | 155.4000 | 110.9 PL | FMN | KNDT250 |
Meeker County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meeker County Fire | Meeker County Fire – Dispatch | 25550 | 63ce | D |
| Meeker County EMS | Mayo – Meeker County Dispatch | 27202 | 6a42 | D |
| Meeker County Hospital | Meeker Memorial Hospital – Litchfield | 25650 | 6432 | D |
Radio system sites in Meeker County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Meeker County
Common questions
What frequency does the fire department use in Meeker County?
Fire dispatch channels listed for Meeker County: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL.
What frequency does EMS or the ambulance service use in Meeker County?
EMS dispatch channels listed for Meeker County: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL.
Do fire departments and EMS use a trunked radio system in Meeker County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Meeker County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Meeker County?
For Meeker County, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.225, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Meeker County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Meeker County are marked encrypted.
Are Meeker County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Meeker County are marked encrypted.