Skip to content

McLeod County Fire and EMS Frequencies

McLeod County in Minnesota has 4 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About McLeod County Fire and EMS Frequencies

Quick answer: Fire dispatch for McLeod County: McLeod County Fire 154.4150 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example McLeod County Fire talkgroup 33208 (hex 81b8).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McLeod County, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.75, 853.125 MHz.

Data updated .

McLeod County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McLeod County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLeod County FireMcLeod County Fire Paging154.4150
In 151.3550
CSQFMNWNSF580

Hospitals & Medical

Hospitals & Medical frequencies for McLeod County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLeod County HospitalHutchinson Community Hospital/Ambulance155.4000107.2 PLFMNKUE469
McLeod County HospitalGlencoe Area Health Center155.4000146.2 PLFMNKWI995
McLeod County HospitalMeeker County Memorial Hospital155.4000110.9 PLFMNKNDT250

McLeod County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
McLeod County FireCounty Fire Dispatch3320881b8D
McLeod County FireHutch Fire Administration3322481c8D
McLeod County EMSCounty EMS3322181c5D
McLeod County HospitalGlencoe Hospital ER3322081c4D
McLeod County HospitalHutchinson Hospital ER3322281c6D
McLeod County HospitalGlencoe Hospital/EMS Administration3322781cbD

Radio system sites in McLeod County

Program the control channel first; your scanner finds the voice channels from it.

McLeod Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 45 (hex 2D)
Control 852.75, 853.125
Voice 851.075, 851.4, 852.1, 852.4625, 853.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McLeod County

Common questions

What frequency does the fire department use in McLeod County?

Fire dispatch channels listed for McLeod County: McLeod County Fire 154.4150 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in McLeod County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McLeod County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McLeod County?

For McLeod County, start with the McLeod Co. - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.75, 853.125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McLeod County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for McLeod County are marked encrypted.

Are McLeod County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for McLeod County are marked encrypted.